Skip to content
Flameless Venting

Q-Rohr® DFE Gas

Green energy revolution without downtimes.

 

The situation: Shutting down coal-fired power plants, decommissioning nuclear power stations and reducing CO2 emissions are basic ideas of the green energy revolution. But this dramatic shift in energy production methods also requires solutions that guarantee the availability of a constant energy supply. The output of wind and solar plants is not constant. When it falls, other sources such as gas-fired power stations must make up the difference.

The challenge: An incorrectly functioning gas-fueled engine can allow a flammable mixture of gas and oxygen to occur in the exhaust system. In the worst case scenario, this could ignite and cause an explosion – not only damaging the engine but also other components and creating a serious risk of injury to persons working in the generator building. Energy production and emergency power supplies would be out of action for an extended period. Unplanned stoppages of gas-fueled engines therefore pose a significant threat to the stability of the electricity grid and energy supply security.

REMBE® has used its many years of experience in explosion safety to develop a system specifically for protecting gas-fueled engines. It reduces downtimes to a minimum and thus increases power plant availability.

for exhaust
ducts of
Gas-Fueled
Engines.

Application

Q-Rohr® DFE permits flameless explosion venting in the generator building without the need for costly and complex venting ducts. If an explosion occurs, neither flames nor a pressure wave emerge from the vessel. Other areas of the plant and employees working in the building have the best possible protection. Normal operation of the power plant can recommence very quickly after an explosion occurs and the energy supply is secure.

Mechanism

The hot flame gases, which can reach temperatures of up to 2.732 °F (1.500°C), are cooled extremely efficiently in the special stainless steel mesh filter inlet developed by REMBE®. This reduces the volume of gas ejected and extinguishes the explosion flame discharge.

Rupture Disk

The disks provide reinforcement.

Seals

The seals are available for all process conditions: Also suitable for high temperatures or sterile requirements.

  • Rapid restart of operations.
  • REMBE® stainless steel filter ensures a high level of noise reduction during normal operation and in the event of an explosion.
  • Eliminates the need for complex venting ducts and wall openings.
  • 100 % seal tightness, to eliminate danger of asphyxiation.
  • 100 % venting efficiency.
  • Individually definable opening pressure.
  • 100 % stainless steel for corrosion resistance.
  • Connection flange in accordance with DIN 86044.
  • No separate safety zones required in outdoor areas.
  • No maintenance required, visual inspection by a technician is sufficient.
  • Eliminates the need for expensive conversion and construction work, e.g. breaking through walls.
Burst pressure Pstat0.1 to 0.5 bar
Operating temperature14 to 1022 °F (−10 to +550 °C)

Our specialists will be pleased to assist you in finding a solution that matches your specific operating conditions.

  • Dual-fuel engines
  • Gas

 

 

Patents
DE 38 22 012
US 7,905,244

Certified in accordance with EN 14797

Application in accordance with EN 14994

Developed in accordance with EN 16009

Recommended Software

VENT.iNG. | Calculations according to EN + NFPA.

VENT.iNG. | Calculations according to EN + NFPA.

Q-Rohr® DFE Gas Product Information

Loading 3D model…

Q_Rohr_DN800_v020

Start the conversation with our engineering team.
Your Safety Starts Here.