Skip to main content

EXKOP® Express

controller for all isolation devices.

REMBE® EXKOP® Express
In the event of an explosion, EXKOP® controllers receive a trigger signal (e.g. from the signaling unit of the Q-Rohr®, an explosion vent, from a pressure sensor or IR-Flame detector) and activate the connected isolation systems which prevents an explosion from propagating.
Advantages
  • One controller for all isolation systems (Quench valves QV II and QV III, Q-Bic™ as well as slide valves RSV and REDEX® Slide).
  • Self-monitoring safety electronics with operating data storage up to 100.000 events.
  • REMBE® iQ Safety Cockpit ready.
  • System status and clear messages reported immediately via the touch panel (optional).
  • Online remote access possible (optional).
REMBE EXKOP Express with Accessoires

line extension

FMX-R 13

IR Flame Detector
The IR Flame Detector is an infrared sensor that is used for immediate detection of explosion flames and thus, together with the EXKOP® Express control system, for explosion isolation of systems in order to prevent the propagation of an explosion to other parts of the plant.
Technical data
Product parameters
Supply voltage
110 V AC/60 Hz – 230 V AC/50 Hz**
Max. no. of connectable detectors (lines)
2 to 36 (x3)
Isolation systems
QV II, QV III, Q-Bic™, RSV, REDEX® Slide
Max. no. of connectable isolation units
Depends on the special application
Power consumption
Depends on the special size
Potential-free relay contacts
from 4 to 64
Wire cross-section (fine wire with ferrule)
0,5 – 0,75 mm²
Ambient temperature
32 - 122 °F (0 – 50 °C)
Protection type
IP 65
ATEX category
zone free
Housing material
Sheet steel housing with powder- coated front
Dimensions (W × H × D)
Depending on the number of detectors and decoupling systems
Weight
Depending on the number of detectors and decoupling systems
Remote access
-
Touch Panel
✓
Our specialists will be pleased to assist you in finding a solution that matches your specific operating conditions.
** Depends on the size of the controller.
Applications + Industries
  • animal feed productions
  • aspiration plants
  • brewery
  • chemical industry
  • conveyors
  • destoners
  • elevators
  • filters
  • food
  • food production
  • mills and grinding plants
  • mixers
  • pharmaceutical industry
  • recycling
  • screens
  • silo
  • spray dryers
  • wood processing

Certifications

ATEX EC type examination certificate no. GEX 19 ATEX 1003X

ATEX EC type
examination certificate no.
FSA 04 ATEX 1537 X

ATEX EC type examination certificate no. GEX 19 ATEX 1003X

ATEX EC type
examination certificate no.
FSA 15 ATEX 1659 X

ATEX EC type examination certificate no. GEX 19 ATEX 1003X

ATEX EC type
examination certificate no.
GEX 19 ATEX 1003X

Certified in
accordance with

EN 15089
Downloads

The EXKOP® system is ideal in combination with explosion vents or flameless explosion venting solutions.

Click and drag image to view.

Scan the QR code with your iOS camera* to see an AR preview of the product.
EXKOP EXPRESS AR Viewer Ru
The dimensions shown may differ from those of the actual product.
* Requires iOS 13, iPadOS 13, ARCore 1.9 or higher.
Unboxed - EXKOP® Maintenance

Any Questions?
We would be happy to show you solutions tailored to your process that limit the effects of an explosion to a harmless level and ensure that production can be resumed quickly after an explosion event.
Contact us.
Consulting. Engineering. Products. Service.
REMBE® Inc.
© REMBE® Inc.