Skip to main content

REMBE® Process Safety

Precise. Process optimized. Reliable. Sustainable. Authentic. Safe.

handmade Process Safety
Overpressure and vacuum is feature of virtually every production process. If the pressure rises above or falls below the specified limits, major damage to plant components may result. The consequences are production standstills and serious commercial losses. A reliable and fast reacting pressure relief system is therefore essential to protect the plant in case the pressure rises above or falls below these limits.
REMBE® rupture discs are high precision safety devices that incorporate state-of-the-art technology. They are individually manufactured and tested for every application. When the pressure reaches a pre-defined limit the rupture disc opens to relieve the system. Our rupture discs can be used as either a primary or secondary relief devices. They can also be used in combination with safety valves. The advantage here is that the valve is protected against contamination by the product or corrosion damage. This is often an attractive and cost-effective option.
Contact us – we will be happy to advise you about the most suitable rupture discs for your process. Individually, in detail and taking all relevant parameters into account.
Advantages
  • Instant response: nothing reacts faster than a rupture disc. Excessive overpressure and vacuum is relieved in milliseconds.
  • Full bore opening available for pressure relief: the entire cross-section is used for fast and safe pressure relief.
  • Leak-tight: prevents process media from escaping during normal operation and thus reduces the costs and problems associated with such losses.
  • Economic solution: significant cost savings compared to other safety systems for pressure relief

All REMBE® rupture discs are Made in Germany and certified in accordance with the Pressure Equipment Directive (PED – 2014/68/EU) as well as all widely recognized and sector-specific international regulations and standards. Among others, these include ASME Sec. VIII, Div. 1, KOSHA (South Korea).

Reverse Acting Rupture Discs

Maximum reliability at high standard operating pressure ratios.
Reverse acting rupture discs are installed with the domed side of the rupture disc facing the process. In this configuration, the rupture disc offers a higher standard operating ratio and better vacuum resistance. It is more resistant, more rugged and gives a longer service life. A higher standard operating ratio allows you to operate your system under a higher load without the risk of fatigue or premature opening of the rupture disc. Since REMBE®rupture discs have an exceptionally long service life, they minimize the risk of commercial losses caused by production downtime. A specially developed production process using lasers guarantees that REMBE® rupture discs offer maximum reliability, precision and manufacturing repeatability.

Forward Acting Rupture Discs

State-of-the-art laser production techniques.
In forward acting rupture discs, the domed side of the disc faces away from the process. At REMBE® we also use state-of-the-art laser production techniques when manufacturing forward acting rupture discs. With a wide choice of materials and designs, we can supply the perfect rupture disc for every application – customized for your process.

Flat Rupture Discs

Full-bore opening with minimum fragmentation.
Flat rupture discs from REMBE® offer you fragmentation- free opening across the full width of the vent. They can be produced in virtually any size, for extremely low pressures from 15 mbar and with very low burst tolerances. For protection against overpressure and vacuum, e.g. in storage vessels and low pressure systems. Also suitable as a secondary safety device alongside breather valves. This rupture disc is designed to work at standard operating ratios of up to 50 %* of the min. response pressure. It is installed directly between flanges and due to its half holes is suitable for all flange systems. A wide range of materials can be used as seals.
* Depending on the specific application.

Customized compact rupture discs

Specially manufactured for your challenges.
Very high or low pressures, high vacuums, temperatures of several hundred degrees Celsius, highly volatile media or difficult installation situations – if your processes have exceptionally high pressure relief requirements, you will find the optimum solution in the following section. We have even successfully protected space satellites against overpressure. As you can see, no application is so lofty that we cannot protect it with the appropriate rupture disc. With more than 1000 different starting materials, we provide you with fast and reliable pressure protection. In our warehouse there are, among other things, stainless steels of the highest purity, e.g. 1.4435 or 1.4404, nickel, monel, inconel, hastelloy, tantalum, titanium, zirconium as well as various precious metals and high-performance plastics. Possible connections: CF / KF flange, ISO-K / ISO-F flange, VCR screw connection, welding neck flange (also with tongue and groove), cutting ring connection, threaded connection.

Graphite Rupture Discs

Extremely corrosive media, low pressures and high temperatures.
REMBE® graphite rupture discs offer you the familiar REMBE® quality and reliability – even in extremely corrosive media, low pressures and high temperatures. The maximum working pressure is 80 % * of the minimum burst pressure. REMBE® graphite rupture discs are applicable for highest temperatures by using a unique chemical vapor deposition method (PyC coating). The rupture discs are applicable from -180 °C up to +500 °C under oxidizing and reducing atmosphere, +1,500 °C under inert conditions.
* Depending on the specific application.

Accessories

for your bursting discs.
Rupture Disc Holder for the perfect Installation and performance for your rupture disc. The various REMBE® rupture disc holders are specially designed to make it impossible to install the corresponding rupture discs incorrectly. Signaling devices for the optimal adaptation of the rupture disc to your requirements. Automated processes use intelligent signaling systems to keep you informed at all times about the status of your entire plant and any faults that may arise.

Service

REMBE® Safetyneering: 5 Elements for maximum Safety.
From the overall consideration of a safety management system, through the execution of process hazard analyses and semi-quantitative risk determinations, to the revalidation and testing of the design of protection layers, a complete package is offered that can help to significantly improve the process safety of plants.

Product overview

Flat Rupture Disc

Flat Rupture Disc

for installation ­directly between flanges.
GRX®

GRX®

for extremely ­corrosive media, low pressures + high ­temperatures.
UKB® LS

UKB® LS

for low burst pressure + high vacuum.
Plug Type

Plug Type

the individual alternative.
HPRD

HPRD

for high pressure + extreme temperatures.
Extruder rupture discs

Extruder rupture discs

for the plastics- and food processing industries.
KUB®

KUB®

developed for your success.
KUB® clean

KUB® clean

for aseptic operating conditions.
KUB® V

KUB® V

for isolating safety valves.
KUB® F

KUB® F

for installation ­directly between flanges.
IKB®

IKB®

the rupture disc with the patented ­manufacturing process.
ODV

ODV

for low to medium pressures.
ODV F

ODV F

for low-pressure ­applications without a holder.
STAR

STAR

for low to high ­pressures.
SFD

SFD

for low to high ­pressures.
CBS

CBS

to protect intermodal tank systems.
BT

BT

single layer rupture disc
for simple ­applications with medium to high ­pressures.
ZW

ZW

bi-directional rupture disc
opens in one ­direction at defined overpressure + in the other direction at vacuum.
two piece holder

two piece holder

rupture disc holder
for reverse acting rupture discs with ­integrated centering pin.
flat-seat holder

flat-seat holder

rupture disc holder
for reverse acting rupture disks for a leak-free seal.
doubleholder

doubleholder

rupture disc holder
for the use of two bursting discs ­connected in series.
heated, cooled holder

heated, cooled holder

rupture disc holder
in applications with polymerizing media.
threaded holder

threaded holder

rupture disc holder
for small assemblies.
ELEVENT®

ELEVENT®

breather valve
protects vessel + Tanks with low design pressures optimal against overpressure and vacuum.
Accessories

signaling devices

Accessories for your rupture discs
Automated processes use intelligent signaling systems to keep you informed at all times about the status of your entire plant and any faults that may arise. You can even install signaling devices for rupture discs that have already been installed. To evaluate the signals, we offer you an isolating switching amplifier with a relay output, which ensures an intrinsically safe quiescent circuit. The potential-free relay contact is used for safe system shutdown or alarming.
Any Questions?
We would be happy to show you solutions tailored to your process that limit the effects of an explosion to a harmless level and ensure that production can be resumed quickly after an explosion event.
Consulting. Engineering. Products. Service.
REMBE® Inc.
© REMBE® Inc.