Record closing times, flexible installation at any angle.
Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The RSV slide valve is suitable for the isolation of fully developed explosions to the maximum explosion pressure.
The RSV Slide is available nominal pipe sizes from DN 50 to DN 500. Thanks to its practical design, the knife gate valve is suitable for all flow velocities and dust loads, it does not cause any pressure drop, and can be installed vertically, horizontally or at any angle.
Extremely short closing times.
Short installation distances thanks to a compact design.
Flexible installation options at any angle.
No loss of pressure.
The system to be protected is equipped with pressure and/or infrared detectors. These can detect an explosion and send a signal to the knife gate valve. Depending on the size, one or more gas generators are activated, which close the slide valve due to the generated pressure. The closed slider blade effectively prevents the propagation of flames and pressure waves. Fast closing times also enable extremely short installation distances. During normal operation, the slide valves can be opened and closed pneumatically.
active action, slide valve gets closed by gas generator
DN 50 - DN 400
for low, medium or high pressure: no pressure drop in the pipe
for low or high dust load: the slide valve is no obstacle in the pipe
suitable for all common media: metallic dusts, hybrid mixtures, gases and organic dusts
for low or high flow velocities, more than 25m/s
for low, middle or high process temperature, up to 200 °C
Mode of operation
single acting, double acting
any installation position, vertical, horizontal or any other angle
Applications + Industries
mills and grinding plants
Certified in accordance with
ATEX EC type examination certificate no. FSA 17 ATEX 1669 X
ATEX EC type examination certificate no. FSA 14 ATEX 1647 X