GSME

for storage points, extraction + filter systems for the detection of combustion gases.

Particularly plants that are at risk of explosive dust must frequently be provided with explosion protection measures, as ignition sources are often unavoidable. In addition to electrostatic phenomena and mechanically generated functions, the most frequent ignition sources particularly include glowing embers, open flames and hot surfaces. Alongside grounding monitoring systems and spark extinguishing systems, the GSME detector series make an enormous contribution to increasing explosion safety. The GSME series have been developed for the early identification of combustion reactions and thermal events, which can ultimately be ignition sources for explosions.

Application

The compact GSME pyrolysis gas detector is specifically tailored for the early detection of hot surfaces and fire in dust-handling equipment, such as silos, dryers, mills, conveyors or dust collectors.

Cable

Junction box

Advantages

Explosion prevention with early detection of smouldering and developing fires.
Highest moisture and dust resistance with unique diffusion filter technology.
Approvals in accordance with ATEX and IECEx.
Comprehensive explosion safety concepts through the integration of the detectors into the REMBE^® EXKOP^® Express control unit.

Mechanism

The well-proven multi-criteria technology on a semiconductor basis already enables foolproof early detection by the GSME of all types of concealed and open glowing embers and smouldering fires in the emergent phase. The sensor elements of the detectors are protected from dust and moisture with the unique diffusion filter technology. The GSME is also protected from the penetration of moisture and dust due to its robust design. It is specifically designed for use in areas up to Zone 20 and tested in accordance with ATEX and IECEx.

Technical data

Mechanical properties

Housing	Coated die-cast aluminium (corrosion-resistant)
Dimensions (H x W x D)	100 x 152 x 100 mm (with cable gland and light module)
Weight	0.7 kg
Protection class	IP 64

Detection properties

Sensor combination	CO — H₂ — HC — NOx
Reaction time	> 30 s
Detection scenario	Smouldering fires according to EN 54/7, smouldering fires from various organic materials

Electrical properties

Voltage supply	20 to 40 V DC
Power consumption	10 VA
Internal fuse protection	750 mA
M-Bus Max. line length	≈ 2 km
M-Bus Max. line capacity	≈ 200 nF
M-Bus Baud rate	4800 baud
Limit value contact alarm relay	680 Ω , 20 mA max. (Alarm closer)
Limit value contact fault relay	0 Ω, 40 V or 20 mA max. (Fault opener)

Thermal properties

Relative humidity	0 to 99 % relative humidity (non-condensing)
Temperature	-20 to +50 °C

Applications + Industries

aerospace
animal feed productions
autoclaves
condensers
desalination plants
dual-fuel engines
elevators
flare stacks
food
LNG
mills and grinding plants
reactors
reverse osmosis systems
separators
silo
water injection pumps

Certifications

ATEX

IECEx

Downloads

Productinformation GSME

In contrast to conventional fire detection systems, the selection and positioning of special fire detectors is a particular challenge for industrial environments. The arrangement and alignment of the detectors should therefore be exclusively specified by specialist planners.

Click and drag image to view.

view in AR

Scan the QR code with your iOS camera* to see an AR preview of the product. GSME AR Viewer Ru

The dimensions shown may differ from those of the actual product.
* Requires iOS 13, iPadOS 13, ARCore 1.9 or higher.

Your contact person

I will be happy to advise you about the most suitable Protection systems for your plant. Individually, in detail and taking all relevant parameters into account.

Alexander Kemmling | Sales Executive Explosion Prevention

+49 2961 7405-189

This email address is being protected from spambots. You need JavaScript enabled to view it.